N03NF-8208 Network LAN Cable Tester Wire Tracker Tracer Length

SKU:

$42.70

This tester is a multipurpose network cable length tester with 3 major functions: hunting, wire sorting and circuit status testing with reliable accuracy. Widely applicable to computer network and other metal wire circuit and other fields. A highly recommended tool for technicians in installation and maintenance of weak current system such as communication line, comprehensive wiring circuit, etc.

Features

Audio probing and cable tracing function
Check wiring error in 5E, 6E, coaxial cable such as open circuit, short circuit, jumper wire, reverse connection or cross-talk interference
Locate the wiring or connection error
Measure cable length and determine the distance of open circuit and short circuit
Dynamically calibrate cable length and make length measurement as accurate as 97%
Directly find the RJ45 cable
In search for other metal cable
Measuring network line-break
Measure twisted-pair length
Auto power off function
Simple and easy use. Big LCD screen to display test result clear
Portable unit with long battery life (standby 50 hours)
Automatically time-delay shut off
Measure length and pair with or without the far-end recognizer
Locate cable and there are 8 far-end passive (remote identifier) test jacks [1D1-ID8]
(Note: only 1 ID1 is included on set )
Far-end recognizer (remote identification) with prompting voice
Self-checking function
Automatically compensate any change in battery capacity or ambient temperature
Single board computer software watchdog design with reliable operation

Specifications:

Display: Special 4 x 16 character big screen LCD lattice(valid visual field 61.6 x 25.2mm)
Type of Cable Tested
- STP/UTP twin twisted cable
- Coaxial cable (RJ45-to-BNC converter is not included in the set)
Type of cable detected
- 5E & 6E
- Coaxial cable (RJ45-to-BNC converter is not included in the set)
- Other metal wires
Tester Port
- Tester RJ45 master port (L), tester LOOPBACK RJ45 port (R)
Length Measurement of Twin Twisted Cable
- Scope: 1~350M ( 3 ~ 200ft)
- Calibration accuracy: 3% (±0.5M or ±1.5ft) (calibrating cable > 5M)
- Shipment accuracy: 5% (±0.5 M or ±1.5 ft) (AMP, AT&T Class 5 cable)
- Display: M (meter) or ft. (feet)
Length Calibration
- User can set calibration factor by himself with a given length cable
- Length of calibrating cable is more than 5M
Wire Sequence and Locating Cable Error: Check errors such as
- Open circuit
- Short circuit
- Reverse connection
- Cross-over or cross-talk interference
Locating Cable: 8 Remote identifier test jacks (ID1 to ID8) (Note: only one ID1 is included on set)
Automatic Time-delay Shut Off Time: if idle for 30 minutes
Power Supply
- Main Unit: 4 x 1.5V AA batteries (not included in set)
- Receiver: 1 x 9V battery (included)
Overall dimension
- Main tester: 180 x 80 x 40mm
- Receiver: 218 x 46 x 29mm
- Remote Identifier: 77 x 31 x 21mm